User's Manual

DSL Gateway/Router — User Manual
Page 4 Total 21 Pages
2 SPECIFICATION
2.1 INTERFACE INTRODUCTION
2.1.1 INDICATOR AND INTERFACE
Table 2.1
ITEM
Name
State introduction
Indicator
POWER
A steady Green light means the power connection works properly
DSL
Green, shows DSL line status.
INTERNET
Green, Flashing means the Modem is transmitting or receiving data
WLAN
Green, Indicates status of connection to the wireless device
WPS(Optional)
Green, Shows WPS status
USB(Optional)
Green, Shows USB status
Interface
LINE
Connected with phone line or “ADSL” port of the splitter.
ETHERNET
To be connected to a PC network card by a straight-through network cable, also
can use a crossover cable to connect to Hub, Switch or Router.
POWER
Power interface, Connect with power adapter.
SWITCH
To turn on / off the power.
RST(Optional)
Press the reset button and turn on the power, then keep pressing the reset button for
6 seconds. Then you can reset the modem with the default settings.
WIRELESS(opt
ional)
Open/Close wireless via pressing the button
WPS(Optional)
Allow PC/Phone connecting to the device via WPS
2.1.2 SPLITTER SPEC
Table 2.2
Interface
Introduction