User's Manual

ADSL MODEM USER MANUAL
- 10 -
3. PROTOCOL CONFIGURATION
If the configuration is bridge encapsulation, there is no need to configure any more parameters. Only need
to use the third party dial-up software to connect the Internet.
Totally, this router supports：PPPoA、PPPoE、Bridging. For detail configuration information, please check
the following configuration guide.
3.1 CONFIGURATION GUIDE
Click “Internet” on “Interface Setup” Tab. You can modify the configuration.
Note: At most we can have eight connections.
You can got the detail about the default seven connections after you click the button “PVCs
Summary”as Figure 3.1
Figure 3.1
If you need to add a new connection, please modify an existing connection
For example, if you need to add a new connection “VPI/VCI=8/88” (The correct PVC (VPI/VCI) you can
get from the ISP.) instead of the connection “VPI/VCI=0/33”.
You can modify as Figure 3.2 and choose “PVC0” and find the change as Figure 3.3.
3
PROTOCAL CONFIGURATION