User's Manual

ADSL MODEM USER MANUAL
- 23 -
Pre-Shared key: The key for network authentication. The input format is in character style and key size should
be in the range between 8 and 63 characters.
The WPS Hardware Push Button and LED behaviors are defined as below:
1）Physical push button is pressed down and holds until the LED starts flashing, WPS starts to process and
the LED will flash.
2）Push button (in the web UI) is pressed, WPS starts to process and the LED will flash.
3）Once the PIN is entered, WPS starts to process and the LED will flash.
4）Once the connection is successfully established between the router and the client, the LED will remain
in solid for 5 seconds to tell the users that the connection has been established.
5）After 5 seconds, the LED will light off to indicate users that the router is ready for a new WPS
connection
5.3.2 APPLY WIRELESS AP
After you changed wireless parameters in wireless section, press "Save" button can apply the changes.