User's Manual

SMART/RG SR400ac 802.11ac Gigabit Router User Manual
20
4.4.2 Before You Begin
Before you install the device, please pay attention to the following items:
 When the device is connected to a computer, hub, router or switch, the
Ethernet cable should be less than 100 meters.
 Do not place this device on an unstable surface or support. Do not put this
device on the ground.
 Keep the device clean. Avoid the device from direct sunshine. Avoid any
metal in the device.
 Place the device in the center of the area, and try to optimize the wireless
coverage.
4.4.3 Connecting the Device
To connect the device, do as follows:
Step 1 Connect one end of the RJ45 cable to the LAN interface of the wireless
router.
Step 2 Connect the other end of the RJ45 cable to your PC.
Step 3 Connect the power adapter to the power socket of the wireless router.
4.5 Operation Range
The operation range of the wireless router depends on the actual environment. The
path and effect of signal transmission vary according to the deployment in a house
or an office.
4.6 Roaming
Suppose that several wireless routers run in the same network. Each wireless
router serves as a BSS that has its coverage range. One wireless client (for
example, a notebook PC or PDA) can realize roaming from one AP to another AP
accurately. In that case, the wireless client can communicate with the other devices
within the coverage range of the wireless router.
We suggest indoor use.