User's Manual

SMART/RG SR400ac 802.11ac Gigabit Router User Manual
31
Field Description
Router
Username
Set the username for access to these configuration pages.
Router
Password
Set the password for access to these configuration pages, Leave
this filed and Router Username blank to disable access control.
Router Mode Choose Router or Access Point here.
Firewall Sets whether the firewall shoule be disabled, Connetctions from
the WAN are allowed if the firewall is disabled.
WAN HTTP
Port
Sets the HTTP prot to use for remote access to these
configuration pages. Leave this field blank to disable remote
access.
Time Zone Set the tme zone of this locale. You may choose Pacific Time,
Mountain Time, Central Time, Eastern Time here.
NTP Server Set the IP address of the NTP servers to use for time
synchronization.
Syslog IP
Address
System log messages will be sent to this IP address.
UPnP Set whether Universal Plug and Play (UPnP) is enabled.
Connection
Logging
Sets which connections through the router shoule be logged.
Seletcing Denied enables logging of denied connections. Select
Accepted enables logging of accepted connections. Select Both
enables logging of both denied and accepted connections.
Coma Mode
Sleep Time
Set the coma mode interval in seconds before reset.