User's Manual

SMART/RG SR400ac 802.11ac Gigabit Router User Manual
32
7.2 LAN
Click LAN to switch to LAN configuration page. In this page, you can configure the
parameters of the LAN port. You can modify the IP address of the LAN port
according to the actual network environment. This router supports Guest Network,
so you can set LAN configuration on both Internel Network and Guest Network.
7.2.1 Basic LAN configuration
The following table describes parameters in this picture:
Field Description
MAC Address
Show the MAC address of LAN interface
LAN Interface Selects interfaces for LAN
Protocol Set the method to use to obtain an IP address of the LAN
interface
IP Address Set the IP address of the LAN interface
Subnet Mask Set the IP netmask of the LAN interface
Default
Gateway
Set the default gateway of the LAN interface