User's Manual

SMART/RG SR400ac 802.11ac Gigabit Router User Manual
33
7.2.2 DHCP configuration
The following table describes parameters in this picture:
Field Description
DHCP Server If it is set Enabled, the router serves as the DHCP server
and automatically assigns IP addresses for all connected
computers.
DHPC Starting IP
Address
The first address in a consecutive IP address pool.
DHCP Ending IP
Address
The last address in a consecutive IP address pool.
DHCP Lease Time After the DHCP lease time elapsed, the router automatically
assigns new IP addresses for all connected computers.
Spanning Tree
Protocol
Enable/Disable Spanning Tree Protocol
7.2.3 IPv6 configuration
This router support IPv6, you can set IPv6 configuration in this page. The following
table describes these parameters:
Field Description
IPv6 Mode If it is set Disabled, IPv6 function is denied. To use IPv6,
choose 6to4 only, native IPv6 Only or 6to4+Native IPv6.