User's Manual

SMART/RG SR400ac 802.11ac Gigabit Router User Manual
36
The following table describes parameters in the above picture:
Field Description
Host Name Some ISPs require that a host name be provided when
requesting an IP address through DHCP.
Domain Name Set the domain name to be provided to LAN clients who
request an IP address through DHCP
MAC Address Some ISPs require that a specific MAC address be used.
Also known as MAC address cloning, this feature allows you
to set the MAC address of the WAN interface.
IP Address Enter the WAN IP address provided by the ISP. It cannot be
null.
Subnet Mask Enter the WAN subnet mask provided by the ISP. It varies
depending on the network type. It is usually 255.255.255.0
(Class C).
Default Gateway Enter the IP address of the gateway provided by the ISP. It is
the IP address used for connecting to the ISP.
DNS Servers Set the IP address of the DNS servers to use for resolving
host names.
WINS Servers Set the IP address of the WINS servers to use for resolving
NetBIOs names.
After setting, click Apply to save the settings.
 PPPoE
If the ISP provides the user name and password for PPPoE dialup, select PPPoE.