User's Manual

SMART/RG SR400ac 802.11ac Gigabit Router User Manual
50
The following table describes parameters in this page:
Field Description
Wireless Interface Select which wireless interface to configure.
802.11
Authentication
Select 802.11 authentication method. Open or shared.
802.11X
Authentication
Select Network anthentication type.
WPA Enable/Disable WPA Authenticated Key Management suite.
WPA-PSK
Enable/Disable WPA-PSK Authenticated Key Management
suite.
WPA2
Enable/Disable WPA2 Authenticated Key Management
suite.
WPA2-PSK
Enable/Disable WPA2-PSK Authenticated Key Management
suite.
BRCM-PSK
Enable/Disable BRCM-PSK Authenticated Key Management
suite.
WPA2
Preauthentication
Enable/Disable WPA2 Preauthentication.
WEP Encryption Enable/Disable WEP data encryption.
WPA Encryption Select the WPA data encryption algorithm.
RADIUS Server
Set the IP address of the RADIUS server to use for
authentication and dynamic key derivation.
RADIUS Port
Set the UDP port number of the RADIUS server. The port
number is usually 1812 or 1645 and depends upon the
server.
RADIUS Key Set the shared secret for the RADIUS connection.
7.14 WPS
Click WPS in the navigation bar on the top pane of the page, the WPS page appears.
This page allows you to configure WPS.