User's Manual

SMART/RG SR400ac 802.11ac Gigabit Router User Manual

capabilities

mode required

required for stations to associate to the

BSS supported by the interface: none –

no requirements on joining devices. erp –

devices must advertise ERP (11g)

capabilities to be allowed on a 2G band

BSS. ht – devices must advertise HT

(11n) capabilities to be allowed on the

BSS. vht – devices must advertise VHT

(11ac) capabilities to be allowed on the

BSS.

1.1 Passpoint

Click SSID in the navigation bar on the top pane of the page, the

SSID page appears.

This page allows you to configure the

Passpoint parameters for each Virtual/Physical interface.

The following table describes parameters in this page:

Field Description