User Manual

QUICK GATEWAY CONFIGURATION
Warning: Do not press the Reset button unless you want to clear the current settings. The Reset button is in a small circular hole
on the rear panel. If you want to restore the default settings, insert a thin wire (such as a paper clip) into the hole, press the
Reset button gently for 1 second, and then release the button. The system reboots and returns to the factory defaults.
Logging in to your gateway
To change the settings on your gateway, you must log in to the gateway's interface. Make sure that you have completed the
steps in "INSTALLATION" before you begin.
1. Open your internet browser application and type 192.168.1.1 into the address line.
1
2. The login dialog appears. Enter the factory default credentials shown below and click Log In.