User Manual

Manual Method
Set up your gateway’s parameters first, then follow these steps.
1. In the left navigation bar, select
Wireless > Security and scroll down to the Manual Setup AP section.
2. If your gateway supports multiple wireless networks, select the SSID of the network you wish to configure. You will need
this ID for step 7.
3. Select the desired Network Authentication. Make sure that the host devices you intend to use support the selected
authentication type.
4. Choose a WPA Passphrase and type it in to this field. You will need this passphrase for step 7.
5. Select any desired encryption preferences in the lower three fields.
6. Click Apply / Save.
7. Follow the WiFi connection instructions provided with your client device to connect to the router. Use the SSID name you
selected in Step 2. Then enter the passphrase that you entered in step 4 in the appropriate location on the network setup
screen of your WiFi client device.