User's Manual

Appendix A – Troubleshooting
V52 User Manual
25
WAN Service Configuration – IPoA
This window allows you to configure the WAN IP settings. This information
is obtained from your ISP. Click the Next button to continue.
WAN Service Configuration – IPoA
This window allows you to enable or disable Network Address Translation
and a firewall for your Router. In addition, you can enable or disable IGMP
multicasting. Click the Next button to continue.
LAN
You can configure the LAN IP address to suit your preference. Many users will find it convenient to use the default settings together with DHCP service to manage
the IP settings for their private network. The IP address of the Router is the base address used for DHCP. In order to use the Router for DHCP on your LAN, the IP
address pool used for DHCP must be compatible with the IP address of the Router. The IP addresses available in the DHCP IP address pool will change
automatically if you change the IP address of the Router.