User Manual

User Manual
115
5.4.2 System Log
Choose Management > System Log to display the following page.
In this page, you are allowed to configure the system log and view the security log.
 Configuring the System Log
Click the Configure System Log button to display the following page.
In this page, you can set 3 types of system log modes, including Local, Remote, and
Both.
 Local: When selecting Local, the events are recorded in the local memory.
 Remote: When selecting Remote, the events are sent to the specified IP
address and UDP port of the remote system log server.
 Both: When selecting Both, the events are recorded in the local memory or
sent to the specified IP address and UDP port of the remote system log
server.
After finishing setting, click the Apply/Save button to save and apply the settings.
Note:
If you want to log all the events, you need to select the Debugging log level.
 View System Log