User Manual

User Manual
8
3.1.2 Rear Panel and Side Panel
Figure 2 Rear panel
Figure 3 Side
panel
The following table describes the interfaces and the buttons.
Interface
Description
DSL
RJ-11 port. Connect the router to DSL connector or splitter through
telephone cable.
LAN 4~1
RJ-45 port, for connecting the router to a PC or another network
device.
WAN
For connecting Ethernet cable to provide Ethernet uplink.
Reset
Press the button for at least 1 second and then release it. System
restores the factory default settings.
USB2
USB port, for connecting the 3G network card or other USB storage
devices.
Power
Power interface, for connecting the power adapter.
On/Off
Power switch.
WIFI
WLAN switch, for enabling or disabling the WLAN function.
WPS
This button is used for enabling WPS PBC mode. If WPS is enabled,
press this button, and then the wireless router starts to accept the
negotiation of PBC mode.