User Manual

User Manual

In this page, you can select a ETH port. Click Apply/Save to save configuration.

Note:

If ETH Interface is selected, there are two WAN service types (PPPoE and

IPoE).

5.2.2 WAN Service

Choose Advanced Setup > WAN Service, and the following page appears.

In this page, you are allowed to add, remove, or edit a WAN service.

Note:

If PTM Interface is selected, there are three WAN service types: PPP over

Ethernet (PPPoE), IP over Ethernet, Bridging. And the corresponding

configurations of PTM WAN service are same as the configurations of ATM

WAN service.

5.2.2.1 Adding a PPPoE WAN Service

This section describes the steps for adding the PPPoE WAN service.