User's Manual

SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2017 100
WPA2 & Mixed WPA2/WPA Authentication
The same configuration fields apply for both WPA2 and Mixed WPA2/WPA authentication methods.
1. On the Wireless > Security page for the band that you want to configure, select WPA2 or Mixed WPA2/WPA in the Network
Authentication field. The following fields appear.
2. Fill in the fields, using the information in the field description table below.
3. Click Apply/Save to save the settings.
The fields on this page are explained in the following table.
Field Name Description
Select SSID Select the SSID of the wireless network to which this security configuration will apply.
Protected Man-
agement Frames
Select whether to enable this option. Options are
Disabled, Capable,
and
Required
.
The default is
Disabled
.
WPA2 Preau-
thentication
Select whether clients can pre-authenticate with the gateway while still connected to
another AP. Options are
Enabled
and
Disabled
. The default is
Disabled
.
Network Re-Auth
Interval
Enter the interval at which the client must re-authenticate with the gateway. Options
are ??? seconds. The default is
36000
seconds (10 hours).
WPA Group Rekey
Interval
The frequency at which the gateway automatically updates the group key and sends it
to connected LAN client devices. Options are
1
-
65535
seconds. The default is
0
(dis-
abled).
RADIUS Server IP Enter the IP address of the RADIUS (Remote Authentication Dial In User Service) server