User's Manual

SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2017 102
Field Name Description
Select SSID Select the SSID of the wireless network to which this security configuration will
apply.
Protected Man-
agement Frames
Select whether to enable this option. Options are
Disabled, Capable,
and
Required
. The default is
Disabled
.
WPA passphrase Enter the security password to be used by this security configuration.
WPA Group Rekey Inter-
val
The frequency at which the gateway automatically updates the group key and
sends it to connected LAN client devices. Options are:
1
-
65535
seconds. The
default is
0
(disabled).
WPA Encryption Select the encryption standard. This field displays the option most compatible
with the selected network authentication method. Options are:
l AES: Advanced Encryption Standard.
l TKIP+AES: AES combined with TKIP (Temporary Key Integrity Protocol).
WEP Encryption Wired Equivalent Privacy (WEP) mode is set to
Disabled
and cannot be changed.
MAC Filter
MAC Filtering refers to an access control methodology whereby the 48-bit address assigned to each LAN host NIC is used to determ-
ine access to the network. It is also known as Layer 2 address filtering.
On this page, you can configure the filter settings.
1. In the left navigation bar, click Wireless > MAC Filter. The following page appears.
2. Select the SSID to which this MAC filter rule should apply.
3. In the MAC Restrict Mode field, select whether to apply MAC filtering. Options are: