User's Manual

SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2017 104
Field Name Description
AP Mode Select whether to enable or disable access point (AP) functionality. Options are:
l Wireless Bridge: Disables AP functionality.
l Access Point: Enables AP functionality. Wireless bridge functionality is still available
and wireless stations can associate to the AP.
Bridge Restrict (
Optional
) Select to enable or disable wireless bridge restriction. Options are:
l Enabled or Enabled(Scan): Enables wireless bridge restriction. This is the default.
Only bridges specified in the Remote Bridge MAC Address field are granted access.
Click Refresh to update the station list. The list takes a few seconds to update.
l Disabled: Disables wireless bridge restriction. Any wireless bridge is granted access.
Remote Bridges
MAC Address
Enter up to four MAC addresses of remote bridges to be allowed access.
Advanced
On this page, you can configure the advanced features of the wireless LAN interface. You can select a particular channel on which to
operate, force the transmission rate to a desired speed, set the fragmentation threshold, the RTS threshold, the wakeup interval
for clients in power-save mode, and more.