User's Manual

SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2017 11
WAN
On this page, you can view information about the connection between your ISP and your gateway. The WAN interface can be DSL or
Ethernet and supports a number of Layer 2 and above configuration options (explained later in this document). Some features are
supported only on specific SmartRG models. Those exceptions are specified in this guide.
In the left navigation bar, click Device Info > WAN. The following page appears.
The fields on this page are explained in the following table.
Field Name Description
Interface The connection interface (Layer 2 interface) through which the gateway handles the traffic.
Description The service description such ipoe_0_0_1, showing the type of WAN and its ID.
Type The service type. Options are
PPPoE
,
IPoE
, and
Bridge
.
VlanMuxId The VLAN ID. Options are
Disabled
or
0
-
4094
.
IPv6 The state of IPv6. Options are
Enabled
and
Disabled
.
Igmp Pxy The IGMP proxy. Options are
Enabled
and
Disabled
.
Igmp Src Enbl The IGMP source option. Options are
Enabled
and
Disabled
.
MLD Pxy The MLD proxy.
MLD Src Enbl The MLD source option. Options are
Enabled
and
Disabled
.
NAT The state of NAT. Options are
Enabled
and
Disabled
.
Firewall The state of the Firewall. Options are
Enabled
and
Disabled
.
Status The status of the WAN connection. Options are
Disconnected
,
Unconfigured
,
Connecting
, and
Connected
.
IPv4 Address The obtained IPv4 address.
IPv6 Address The obtained IPv6 address.