User's Manual

SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2017 123
4. To modify the system log settings:
a. Click Configure System Log. The System Log - Configuration page appears.
b. Modify the settings as needed.
The following table describes the options for configuration of the system log.
Action Description
Log Select to turn logging off or on. The default is
Disable
.
Logging Level Select
Error
unless actively troubleshooting a situation with a subscriber for which
increased log detail is required. Options are
Emergency
,
Alert
,
Critical
,
Error, Warn-
ing
,
Notice
,
Informational
, and
Debugging
. The options are listed in top-down order
of increasing detail. The default is
Debugging
(all information).
Display Level Select
Error
unless actively troubleshooting a situation with a subscriber for which
increased detail is required. This field has the same options as the
Logging Level
field. The default is
Error
.
Mode Controls where log events will be sent. Options are:
l To send logs to the specified IP address and UDP port of a remote syslog
server, select Remote or Both.
l To record events in the local memory of your SmartRG gateway, select Local
or Both.
The default is Local.