User's Manual

SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2017 125
SNMP Agent
On this page, you can configure the SNMP (Simple Network Management Protocol) settings to retrieve statistics from the SNMP agent
for the gateway. You can enable or disable the SNMP agent and set parameters such as the read community, system name and trap
manager IP.
1. In the left navigation bar, click Management > SNMP Agent. The following page appears.
2. To enable SNMP, click Enable in the SNMP Agent field.
3. Modify the other fields as needed, using the information in the following table.
4. Click Save/Apply to commit your changes.
The fields on this page are explained in the following table.
Field Name Description
Read Community The options are public and private. The default is
public
.
Set Community The options are public and private. The default is
private
.
System Name The name of the system.
System Location (
Optional
) The location of the system.
System Contact (
Optional
) The contact for the system.
Trap Manager IP (
Optional
) The IP address where the trap manager is installed.