User's Manual

SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2017 128
Field Name Description
ware versions prior to 2.5.0.2, MAC is the only available option.
l Serial Number: This option is available for SmartRG gateways using firm-
ware versions later than 2.5.0.2.
TR-069 Client Enable or disable the TR-069 client on the CPE. You can disable the TR-069
WAN Management Client if no ACS is employed.
Note: If you may want to add an ACS to your infrastructure in the future, it is
recommended that you leave this option enabled. Once this feature is dis-
abled, every gateway deployed with this setting must be manually/locally re-
configured to re-enable this client.
ACS URL from DHCP Click the
Enabled
checkbox to enable your gateway to obtain the ACS URL via
DHCP.
Inform Interval The frequency (in seconds) with which the CPE (gateway) checks in with the
ACS to sync and exchange data. A typical production environment entails CPEs
in the field informing to the ACS once/day or every 86,400 seconds. The
default is
3600
seconds (1 hour).
ACS URL Enter the URL for the CPE to connect to the ACS using the CPE WAN Man-
agement Protocol. This parameter MUST be in the form of a valid HTTP or
HTTPS URL. An HTTPS URL indicates that the ACS supports SSL. The "host" por-
tion of this URL is used by the CPE for validating the certificate from the ACS
when using certificate-based authentication.
You can include a port specification suffix if your ACS platform requires it, e.g.,
http://customer.acs.wanmanagmentservices.com:30005 where 30005 is the
port number. The default port is 30005.
ACS User Name Enter the user name by which this gateway logs in to the ACS. The default
username is typically admin.
ACS Password Enter the password to authenticate the above user name. The default pass-
word is typically admin.
TR-069 Client Port Enter the TR-069 port number. The default is
30005
.
WAN Interface used
by TR-069 client
Select
Any_WAN
,
LAN
,
Loopback
, or a configured connection to declare how
this gateway will connect to the ACS.
4. (Optional) Configure the modem client Connection Request mechanism used by your ACS for communication with subscriber
gateways. Use the information provided in the following table.
Field Name Description
Connection Request
Authentication
This option is enabled by default. Click the checkbox to disable this option.
The fields listed below are hidden.
Connection Request
Username
Enter the user name by which this gateway authenticates the ACS. Contact
your ACS provider for this information.
Connection Request
Password
Enter the password by which this gateway will authenticate to the ACS.
Contact your ACS provider for this information.