User's Manual

SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2017 137
The fields on this page are explained in the following table.
Field Name Description
Services This column identifies the SCL services that can be enabled or disabled. Options
are:
FTP
,
HTTP
,
ICMP
,
SNMP
,
SSH
,
TELNET
, and
TFTP
.
Use encrypted HTTP(S) Click this checkbox to implement secured HTTP. This option is enabled for the LAN.
Warning: When you click this option, the gateway reboots.
LAN Select the service enabled on LAN side firewall. Depending on configuration set-
tings made elsewhere in the GUI, this column may be read-only.
Note: ICMP is an always-enabled service by default and has no checkbox.
WAN Select the service enabled on the WAN side firewall.
WAN Port Number The port the access control applies to on the WAN side for the given service. See
port information below.
Service port
options
FTP FTP Service access (For WAN, this is the default port).
HTTP HTTP Service access (For WAN, this is in association with specified port. The default
is port
80
.
ICMP ICMP Service access (For WAN, this is the default port).
SNMP SNMP Service access (For WAN, this is the default port).
SSH SSH Service access. For WAN, this is in association with the specified port. The
default is port
22
.
TELNET TELNET Service access (For WAN, this is the default port).
TFTP TFTP Service Access (as with default port).
Passwords
On this page, you can create or change passwords associated with access to the gateway. Three accounts are available to manage:
Admin, Support and User.