User's Manual

SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2017 29
7. Modify the fields as needed.
The fields on this page are explained in the following table.
Field Name Description
PPP Username Enter the username required for authentication to the PPP server.
PPP Password Enter the password required for authentication to the PPP server.
PPPoE Service Name (
Optional
) Enter a description for this service.
Authentication Method Select a means for authentication. Options are:
l AUTO: Attempt to automatically detect handshake protocols
(listed below). This is the default.
l PAP: Password Authentication Protocol (plaintext pass-
words).
l CHAP: Challenge Handshake Authentication Protocol. (MD5
hashing scheme on passwords).
l MSCHAP: Microsoft Challenge Handshake Authentication Pro-
tocol. (Microsoft encrypted password authentication pro-
tocol).
LCP Keepalive Period The frequency at which the keepalive packet is sent by the gateway
to the PPP server.
LCP Retry Threshold Enter the number of additional attempted packets that the gateway
will send (in the event that the PPP server does not respond to the
Keepalive) before giving up and declaring the connection as Failed.
PPP IP Extension Select whether to forward all traffic to the advanced DMZ IP spe-
cified in the next field.
Advanced DMZ (
Available when PPP IP Extension is selected
) Specify the IP
address and net mask to which PPPoE traffic is forwarded.
Use Static IPv4 Address Specify the IPv4 Address to apply for this WAN service in the
IPv4
Address
field that appears.
Use Static IPv6 Address Specify the IPv6 Address to apply for this WAN service in the
IPv6
Address
field that appears.
Enable IPv6 Unnumbered
Model
Click to enable IP processing on a serial interface without assigning it
an explicit IP address. The IP address of another interface can be
can "borrow" the IP address of another interface already configured
on the router, which conserves network and address space.
Launch Dhcp6c for Address
Assignment (IANA)
(
Available only for IPv6 environments
) Select this option for the CPE
to receive the WAN IP from the ISP.
Launch Dhcp6c for Prefix
Delegation (IAPD)
(
Available only for IPv6 environments
) This option is enabled by
default. The CPE generates the WAN IP's prefix from the server's
REST by MAC address. Click the checkbox to disable this option.
Retry PPP password on
authentication error>
Enter the maximum number of PPP authentication retries on failure
in the
Max PPP authentication retries
field. Options are
1
-
65536
.
The default is
65536
(unlimited retries).