User's Manual

SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2017 35
2. Select the Layer2 interface to use for the WAN service and click Next. The following page appears.
3. Select the IP over Ethernet WAN service type.
4. Modify the other fields as needed.
The fields on this page are explained in the following table.
Field Name Description
Enter Service
Description
(
Optional
) Enter a name to describe this configuration.
Enter 802.1P Pri-
ority
Enter a priority for this WAN service. Options are
0
-
7
. The default is
0
.
For tagged service, enter values in this field and the 802.1Q VLAN ID field.
For untagged service, enter -1 (disabled) in this field and the 802.1Q VLAN ID field.
Enter 802.1Q VLAN
ID
Enter the VLAN ID for this WAN service. Options are
0
-
4094
. The default is
-1
(dis-
abled).
For tagged service, enter values in this field and the 802.1P Priority field.