User's Manual

SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2017 37
6. Enter the relevant WAN IP Settings.
The fields on this page are explained in the following table.
Field Name Description
Obtain an IP address auto-
matically
When you wish the ISP to automatically assign the WAN IP to the gateway.
Option 60 Vendor ID (
Optional
) Broadcast a specific vendor ID for the DHCP server to accept the device.
Option 61 IAID (
Optional
) Interface Association Identifier (IAID). A unique identifier for an IA, chosen by the
client.
Option 61 DUID (
Optional
) DHCP Unique Identifier (DUID) is used by the client to get an IP address from the
DHCP server.
Option 77 User ID (
Optional
) Enter the user class ID that should be used to filter traffic.
Option 125 (
Optional
) Select whether to enable local devices to automatically receive DHCP options
from the server.
Option 50 Request IP Address Select to request a specific IP address when sending messages. If the address is not avail-
able, the DHCP server assigns the next allowed IP address.
Option 51 Request Leased
Time
Select to request the maximum lease time defined for the client.
Option 54 Request Server
Address
Select to request the IP address of the source server.
Use the following Static IP
address
Select this option to manually declare the static IP information provided by your ISP.
WAN IP Address If using a static IP address, enter the static WAN IPV4 Address.
WAN Subnet Mask If using a static IP address, enter the static Subnet Mask.
WAN gateway IP Address If using a static IP address, enter the static Gateway IP address.
Advanced DMZ (
Optional
) Select this option to enable Advanced DMZ on the WAN service.
Non DMZ IP Address If using the Advanced DMZ feature, you can enter a specific vendor ID that will be broadcast
for the DHCP server to accept the device, y. e.g., 192.168.2.1..
Non DMZ Net Mask If using the Advanced DMZ feature, you can enter a secondary LAN IP address for the gate-
way. The default is
255.255.255.0
.
IPv6 settings
section
The following fields appear when either IPv6 Only or IPv4&IPv6 (Dual Stack) network protocol values is selected on the
WAN Service Configuration page.
Obtain an IPv6 address auto-
matically
Enables the DHCPv6 Client on this WAN interface. Select this option when you want the ISP
to automatically assign the WAN IP to the gateway.
Dhcpv6 Address Assignment
(IANA)
Select this option for the CPE to receive WAN IP from ISP.
Dhcpv6 Prefix Delegation
(IAPD)
This option is selected by default and enables the CPE to generate the WAN IP's prefix from
the server's REST by MAC address.
Use the following Static IPv6
address
Select this option to manually declare the v6 Static IP information provided by your ISP. In
the
WAN IPv6 Address/Prefix Length
field, enter the IP address / prefix length. If you do