User's Manual
Table Of Contents
- Welcome!
- Getting Familiar with your Gateway
- Installing your SR700ac Gateway
- Logging into your Gateway's UI
- Device Info
- Advanced Setup
- LTE WAN Service
- Wireless
- Diagnostics
- Management
- Logging Out
- Appendix: Compliance Statements
- Revision History
SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2017 45
Field Name Description
l Option 150: Enter a comma-separated list of TFTP IPv4 server addresses. The
maximum allowed is 2.
l Option 43: Enter the loopback address of the master controller in ASCII
format.
Configure the second
IP address and sub-
net mask for LAN
interface
When you select this option, the
IP Address
and
Subnet Mask
fields appear where
you can enter a second IP address and Subnet mask to support a second, sim-
ultaneous LAN.
For example, the primary LAN might be defined as 192.168.0.1 and this secondary LAN
defined as 192.168.2.1.
IPv6 Autoconfig
On this page, you can configure your gateway's IPv6 environment.