User's Manual

Table Of Contents

1. In the left navigation bar, select Advanced Setup > NAT and then click Add. The following page appears.

2. Customize the fields to create your port forwarding entry.

3. Click Apply/Save to commit your changes. The servers for the selected service appear on the NAT Virtual Servers Setup

page.

The fields on this page are explained in the following table.

Field Name Description

Use Interface Select the WAN interface to which this NAT rule will apply.

Select a Service Select from a list of application that typically require port forwards configured. The

port ranges and protocol fields will be pre-populated.

Custom Service If your application does not appear in the

Select a Service

list, you can enter a unique

name for the application in this field.