User's Manual

Table Of Contents

2. Fill in the fields, using the information in the table below.

3. Click Apply/Save to commit your changes.

The fields on this page are explained in the following table.

Field Name Description

Filter Name A free-form text field. Enter a descriptive name for this filter.

IP Version Select the IP version for this filter. Options are

IPv4

and

IPv6

. The default is

IPv4

Protocol Select the protocol to be associated with this incoming filter. Options are:

TCP/UDP

TCP

UDP

, or

ICMP

Source IP address [/pre-

fix length]

Enter the source IP address for rule. For IPv6, enter the prefix as well.

Source Port (port or

port:port)

Enter source port number or range (xxxxx:yyyyy).

Destination IP address

[/prefix length]

Enter the destination IP address for rule. For IPv6, enter the prefix as well.

Destination Port (port or

port:port)

Enter destination port number or range (xxxxx:yyyyy).

WAN Interfaces Select the WAN interfaces to which this rule will be applied. Options are

Select

All

or the interfaces defined for your network. The default is

Select All