User's Manual
Table Of Contents
- Welcome!
- Getting Familiar with your Gateway
- Installing your SR700ac Gateway
- Logging into your Gateway's UI
- Device Info
- Advanced Setup
- LTE WAN Service
- Wireless
- Diagnostics
- Management
- Logging Out
- Appendix: Compliance Statements
- Revision History
SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2017 67
Routing
In this section, you can configure default gateways, static routing, policy routing and RIP settings.
Default Gateway
On this page, you can configure the default gateway interface list to establish access priority, that is, iInterfaces are accessed in the
order listed in the Selected Default Gateway Interfaces column.
1. In the left navigation bar, select Advanced Setup > Routing. The following page appears.
2. Select the interfaces that you want used as default gateway interfaces. Click the arrows to move your selection between the
columns. Move the highest priority interface first, followed by the next highest priority interface, and so on.
3. (Optional) In the Selected WAN Interface field, select an IPv6 interface. You must configure the IPv6 interface before it
appears in this field.
4. Click Apply/Save to commit your changes.
Static Route
On this page, you can configure static routes for your network. A static route is a manually configured, fixed route for IP data. You
can enter a maximum of 32 entries.