User's Manual

SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2017 69
1. In the left navigation bar, click Advanced Setup > Routing > Policy Routing and then click Add. The following page appears.
2. Fill in the fields, using the information in the table below.
3. Click Apply/Save to commit your changes.
The fields on this page are explained in the following table.
Field Name Description
Policy Name Enter a descriptive name for this entry to the policy routing table. This is a free-form text field.
Physical LAN Port Select a physical LAN interface for the policy route.
Source IP Enter the IP address for the source of this policy route.
Use Interface Select the WAN Interface for this policy route.
Default Gateway IP Enter the IP address of the default gateway.
RIP (Routing Information Protocol)
RIP is a type of distance-vector routing protocol, which leverages hop count as a metric for routing. RIP puts a limit on the number of
hops (maximum of 15) allowed in order to prevent routing loops. This can sometimes limit the size of networks where RIP can be suc-
cessfully employed.
On this page, you can configure the RIP settings.