User's Manual

SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2017 72
2. Modify the settings as needed, using the information supplied by your provider and that supplied in the table below.
3. Click Apply/Save.
The fields on this page are explained in the following table.
Field Name Description
Select DNS Server Interface
from available WAN inter-
faces
Select entries in the
Selected DNS Server Interfaces
and
Available WAN
Interfaces
columns and click the arrows to move them left or right. At
least one entry must remain in the
Selected DNS Server Interfaces
column.
Use the following Static DNS
IP address
Click to use static DNS IP addresses. Then, enter the IP addresses of the
primary and secondary DNS servers.
Obtain IPv6 DNS info from a
WAN interface
This option is selected by default. Change the value in the
WAN Interface
selected
field only for IPv6 environments.
Use the following Static
IPv6 DNS IP address
Click to use static DNS IP addresses. Then, enter the IP addresses of the
primary and secondary IPv6 DNS servers.
Dynamic DNS
Dynamic DNS (DDNS) automatically updates a name server in the DNS with the active DNS configuration of its configured hostnames,
addresses or other data. Often this update occurs in real time. On this page, you can configure the settings for this feature.
1. In the left navigation bar, click Advanced Setup > DNS > Dynamic DNS and then click Add. The following page appears.
2. Enter your desired settings.
3. Click Apply/Save to commit your changes.