User's Manual
Table Of Contents
- Welcome!
- Getting Familiar with your Gateway
- Installing your SR700ac Gateway
- Logging into your Gateway's UI
- Device Info
- Advanced Setup
- LTE WAN Service
- Wireless
- Diagnostics
- Management
- Logging Out
- Appendix: Compliance Statements
- Revision History
SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2017 81
3. Select the WAN and LAN interfaces associated with the tunnel you wish to establish. The Manual button is selected by
default.
4. Enter the appropriate values in the IPv4 Mask Length, 6rd Prefix with Prefix Length and Border Relay IPv4 Address fields.
5. Click Apply/Save to commit your changes.
IPv4inIPv6
On this page, you can configure the IPv4inIP6 settings.
1. In the left navigation bar, click Advanced Setup > IP Tunnel > IPv6inIPv4 and then click Add. The following page appears.
Note: Currently, only the DS-Lite mechanism is supported.
2. Enter a brief descriptive Tunnel Name.
3. Select the LAN and WAN interfaces associated with the tunnel you wish to establish.
4. In the AFTR field, enter the Address Family Transition Router remote address.
5. Click Apply/Save to commit your changes.