User's Manual
Table Of Contents
- Welcome!
- Getting Familiar with your Gateway
- Installing your SR700ac Gateway
- Logging into your Gateway's UI
- Device Info
- Advanced Setup
- LTE WAN Service
- Wireless
- Diagnostics
- Management
- Logging Out
- Appendix: Compliance Statements
- Revision History
SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2017 82
IPSec
Internet Protocol Security is a protocol for securing communications by packet level encryption and authentication.
On this page, you can enable and remove connections, or edit existing connections.
1. In the left navigation bar, click Advanced Setup > IP Sec and then click Add New Connection. The following page appears.
2. Enter your connection details by completing the appropriate fields.
3. If desired, click Advanced IKE Settings to select Phase 1 and Phase 2 specific parameters. For detailed information about
these settings, see "Advanced IKE Settings".
4. Click Apply/Save to commit your changes.
The fields on this page are explained in the following table.