User's Manual
Table Of Contents
- Welcome!
- Getting Familiar with your Gateway
- Installing your SR700ac Gateway
- Logging into your Gateway's UI
- Device Info
- Advanced Setup
- LTE WAN Service
- Wireless
- Diagnostics
- Management
- Logging Out
- Appendix: Compliance Statements
- Revision History
SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2017 93
Field
Name
Description
Network Mode
section
Network
Dial
Mode
Select the Network Dial Mode. Options are 4G/3G Auto, 4G Only, and 3G Only.
APN Settings
section
APN
Name
Enter the Access Point Name for your network provider.
Wireless
In this section, you can configure the wireless interface settings for your gateway, including basic and advanced settings, MAC fil-
tering, and wireless bridging.
Note: While separate pages are provided for both wireless bands (2.4 Ghz and 5 Ghz), the fields are the same for both bands.
Basic
On this page, you can configure basic features of the Wi-Fi LAN interface. You can enable or disable the Wi-Fi LAN interface, hide the
network from active scans, set the Wi-Fi network name (also known as SSID) and restrict the channel set based on country require-
ments.
1. In the left navigation bar, click Wireless. The following page appears.
Note: Menu options appear for both wireless channels. Click the wireless channel that you want to configure and proceed
with configuration. The same fields are available for both channels.