User's Manual

SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2017 97
Field Name Description
mode is automatically made active.
Set WPS AP Mode (
Appears when WPS is enabled
) Select how security is assigned to clients.
l Configured: The gateway assigns security settings to clients.
l Unconfigured: An external client assigns security settings to the gateway.
Device PIN (
Appears when WPS is enabled
) The PIN for the gateway. This value is generated by the access
point.
Manual Setup AP
section
Select SSID Select the SSID of the wireless network to which this security configuration will apply.
Network
Authentication
Select the desired network security authentication type. Options are:
Open
,
Shared
,
802.1X
,
WPA2
,
WPA2-PSK
,
Mixed WPA2/WPA
, and
Mixed WPA2/WPA-PSK
.
The fields shown in the Manual Setup AP section of the page vary based on the network authentication method that you select. The
variations are explained in the following sections:
l "Open & Shared Authentication"
l "802.1X Authentication"
l "WPA2 & Mixed WPA2/WPA Authentication"
l "WPA2-PSK & Mixed WPA2/WPA-PSK Authentication"
Open & Shared Authentication
The same configuration fields apply for both Open and Shared authentication types. However, WPS may not be used with the Shared
method.
1. On the Wireless > Security page for the band that you want to configure, select Open or Shared in the Network Authentic-
ation field.
2. For Open authentication, in the Enable WPS field, select Enabled. The following fields appear.
Note: For Shared authentication, this option is set to Disabled and cannot be changed.