User's Manual

SR804N Cable Modem User Manual
12
This page also displays IP lease information, including the current IP address of the
cable modem, the duration of both leases, the expiration time of both leases, and the
current system time from the DOCSIS timeserver.
The information on this page can be refreshed at any time by clicking your web
browser‟s Refresh button.
5.1.3 Security
Choose Status > Connection and the following page appears.
Figure 6 Security configuration
To restore factory defaults, select the Yes radio button and click Apply. This will
cause the device to reset. The factory default password is “Broadcom” and is
case sensitive.
Note that you can also change the security password from this page by entering a
new password in both the New Password and Re-Enter New Password fields, and
the current password in the Current User ID Password field. Clicking Apply will
change the password. You do NOT have to restore factory defaults to change the
password.
5.1.4 Diagnostics
Choose Status > Diagnostics and the following page appears.