User's Manual

SR804N Cable Modem User Manual
15
Figure 10 Setup configuration
Enter the information from the Required Information section as indicated:
1.If your ISP uses DHCP, select “DHCP” for the WAN Connection Type, and enter
Host Name and Domain name if required. OR
If your ISP uses static IP addressing, select “Static IP” for the WAN Connection
Type, and enter the information provided by your ISP for Static IP Address, Static IP
Mask, Default Gateway, Primary DNS, and Secondary DNS.
2.Enter a unicast MAC address in the Spoofed MAC Address field. Your ISP may
require this to be your PC‟s MAC address. If not, you can simply supply the WAN
side MAC address of the router as your CPE and leave the spoofed MAC address
entry set to all 0‟s, since there will be no spoofing required.
3.Select the Apply button. This will reset the CMRG.
At this point, the CMRG is configured for basic use. To connect to the Internet,
you must do the following:
1.Power up the CMRG and wait for it to register with the CMTS and obtain an
Internet-routable IP address
2.Get an IP lease from the internal DHCP server for each PC attached to the
CMRG.