User's Manual

SR804N Cable Modem User Manual

Regulatory Mode:

Selects either 802.11d or 802.11h modes of operation. These are amendments to the

802.11 specifications for solving interference issues with other transmission systems

such as satellite or radar, and also transmission requirements in different parts of the

world.

TPC Mitigation (dB):

Transmit Power Control mitigation factor in dB. Transmit Power Control is used to

automatically reduce the transmission power when other networks are within range.

This setting is only used when the Regulatory Mode is set to 802.11h.

OBSS Coexistence:

Enable/Disable Overlapping BSS Coexisistence. OBSS coexistence refers to the

ability of the AP to support 20 MHz devices within 40 MHz channels. It also allows the

AP to better deal with nearby 20 MHz devices that are interfering with part of its 40

MHz channel.

STBC Tx:

STBC :Space Time Block Code. Switch to on will obtain the full antenna gain.

Scan Wireless AP’s:

Force the Modems Access Point to scan for other AP‟s within receive range.

Apply:

When any of the above settings are changed, the Apply button must be clicked in

order to activate them.

5.7.2 Primary Network

Choose Wireless > Primary Network to display the following page.

Country

First Channel

Last Channel

USA

Worldwide, China, Europe

Japan, Thailand, All Channels

Israel

Jordan