User's Manual
Table Of Contents
- Safety Precautions
- Overview
- Application
- Features
- Standards Compatibility and Compliance
- Hardware Description and Hardware Installation
- Hardware Description
- Front Panel
- Rear Panel
- Hardware Installation
- Connecting the Device
- PC Network Configuration and Login
- PC Network Configuration
- Logging In to the BCM3384 Cable Modem
- Web-Based Management
- Status
- Software
- Connection
- Security
- Diagnostics
- Basic
- Setup
- DHCP
- DDNS
- Backup
- Advanced
- Options
- IP Filtering
- MAC Filtering
- Port Filtering
- Forwarding
- Port Triggers
- DMZ Host
- RIP Setup
- Firewall
- Basic
- Filtering
- Local Log
- Remote Log
- VPN
- Basic
- IPsec
- Event Log
- Wireless
- Radio
- Radio
- Guest Network
- Advanced
- Access Control
- WMM
- Bridging
- MTA
- Status
- DHCP
- QoS
- Provisioning
- Event Log
- Battery
- Controller
- UPS
- Interface Delay
- USB
- USB Basic
- Approved Devices
- Storage Basic
- Storage Advanced
- MediaServer
- Q&A
SR808ac Cable Modem User Manual
7
4 PC Network Configuration and Login
4.1 PC Network Configuration
Each network interface on the PC should either be configured with a statically defined
IP address and DNS address, or be instructed to automatically obtain an IP address
using the network DHCP server. BCM3384 provides a DHCP server on its LAN and it
is recommended to configure your LAN to automatically obtain its IP address and
DNS server IP address.
The configuration principle is identical but should be carried out differently on each
operating system.
The following displays the TCP/IP Properties dialog box on Windows XP.