User's Manual
Table Of Contents
- Safety Precautions
- Overview
- Application
- Features
- Standards Compatibility and Compliance
- Hardware Description and Hardware Installation
- Hardware Description
- Front Panel
- Rear Panel
- Hardware Installation
- Connecting the Device
- PC Network Configuration and Login
- PC Network Configuration
- Logging In to the BCM3384 Cable Modem
- Web-Based Management
- Status
- Software
- Connection
- Security
- Diagnostics
- Basic
- Setup
- DHCP
- DDNS
- Backup
- Advanced
- Options
- IP Filtering
- MAC Filtering
- Port Filtering
- Forwarding
- Port Triggers
- DMZ Host
- RIP Setup
- Firewall
- Basic
- Filtering
- Local Log
- Remote Log
- VPN
- Basic
- IPsec
- Event Log
- Wireless
- Radio
- Radio
- Guest Network
- Advanced
- Access Control
- WMM
- Bridging
- MTA
- Status
- DHCP
- QoS
- Provisioning
- Event Log
- Battery
- Controller
- UPS
- Interface Delay
- USB
- USB Basic
- Approved Devices
- Storage Basic
- Storage Advanced
- MediaServer
- Q&A
SR808ac Cable Modem User Manual
9
Step6 Select the Obtain DNS server address automatically radio button.
Step7 Click OK to save the settings.
4.2 Logging In to the BCM3384 Cable Modem
To log in to the BCM3384 cable modem, do as follows:
Step1 Open a Web browser on your computer.
Step2 Enter http://192.168.100.1 (the default IP address of the BCM3384 cable
modem) in the address bar. The login page appears.
Step3 Enter the user name and the password. The default username is blank
and enter “Broadcom” in the Password field.
Step4 Click OK to log in to the Web page. Otherwise, please click Cancel to exit
the login page.
Figure 2 Login page
After logging in to the BCM3384 cable modem, you can query, configure, and
modify all the settings, and diagnose the system.