User's Manual
Table Of Contents
- Safety Precautions
- Overview
- Application
- Features
- Standards Compatibility and Compliance
- Hardware Description and Hardware Installation
- Hardware Description
- Front Panel
- Rear Panel
- Hardware Installation
- Connecting the Device
- PC Network Configuration and Login
- PC Network Configuration
- Logging In to the BCM3384 Cable Modem
- Web-Based Management
- Status
- Software
- Connection
- Security
- Diagnostics
- Basic
- Setup
- DHCP
- DDNS
- Backup
- Advanced
- Options
- IP Filtering
- MAC Filtering
- Port Filtering
- Forwarding
- Port Triggers
- DMZ Host
- RIP Setup
- Firewall
- Basic
- Filtering
- Local Log
- Remote Log
- VPN
- Basic
- IPsec
- Event Log
- Wireless
- Radio
- Radio
- Guest Network
- Advanced
- Access Control
- WMM
- Bridging
- MTA
- Status
- DHCP
- QoS
- Provisioning
- Event Log
- Battery
- Controller
- UPS
- Interface Delay
- USB
- USB Basic
- Approved Devices
- Storage Basic
- Storage Advanced
- MediaServer
- Q&A
SR808ac Cable Modem User Manual
18
5.2.4 Backup
Choose Basic > Backup, and the following page appears.
Figure 12 Backup setup
In this page, you can save the current CMRG configuration settings to a local PC.
You can then later restore these settings if you need restore a particular
configuration, or to recover from changes you may have made that have had an
undesirable effect.
To backup the current configuration, click Backup and follow the prompts.
To restore a previous configuration, click Browse and use the navigation window to
locate the file. (Usually GatewaySettings.bin, unless you rename it before
saving.) Once the file has been located, click Restore to restore the settings.
Note that once the settings are restored, the device will reboot.