User's Manual
Table Of Contents
- Safety Precautions
- Overview
- Application
- Features
- Standards Compatibility and Compliance
- Hardware Description and Hardware Installation
- Hardware Description
- Front Panel
- Rear Panel
- Hardware Installation
- Connecting the Device
- PC Network Configuration and Login
- PC Network Configuration
- Logging In to the BCM3384 Cable Modem
- Web-Based Management
- Status
- Software
- Connection
- Security
- Diagnostics
- Basic
- Setup
- DHCP
- DDNS
- Backup
- Advanced
- Options
- IP Filtering
- MAC Filtering
- Port Filtering
- Forwarding
- Port Triggers
- DMZ Host
- RIP Setup
- Firewall
- Basic
- Filtering
- Local Log
- Remote Log
- VPN
- Basic
- IPsec
- Event Log
- Wireless
- Radio
- Radio
- Guest Network
- Advanced
- Access Control
- WMM
- Bridging
- MTA
- Status
- DHCP
- QoS
- Provisioning
- Event Log
- Battery
- Controller
- UPS
- Interface Delay
- USB
- USB Basic
- Approved Devices
- Storage Basic
- Storage Advanced
- MediaServer
- Q&A
SR808ac Cable Modem User Manual
38
This page allow you to configure the Primary Wireless Network.
Primary Network:
Enable or Disable the primary network. Guest networks may still be operational when
the primary network is disabled.
Network Name (SSID):
Sets the Network Name (also known as SSID) of the primary network. This is a 1-32
ASCII character string.
Closed Network:
The Network Name is not broadcast by the AP in a Closed Network. Therefore, only
clients who already know the network name will be able to connect.
WPA:
Wi-Fi Protected Access is a slightly older and less secure algorithm for securing a
wireless network. This is the Enterprise variant that requires configuration of a
RADIUS server.
WPA-PSK: