User's Manual
Table Of Contents
- Safety Precautions
- Overview
- Application
- Features
- Standards Compatibility and Compliance
- Hardware Description and Hardware Installation
- Hardware Description
- Front Panel
- Rear Panel
- Hardware Installation
- Connecting the Device
- PC Network Configuration and Login
- PC Network Configuration
- Logging In to the BCM3384 Cable Modem
- Web-Based Management
- Status
- Software
- Connection
- Security
- Diagnostics
- Basic
- Setup
- DHCP
- DDNS
- Backup
- Advanced
- Options
- IP Filtering
- MAC Filtering
- Port Filtering
- Forwarding
- Port Triggers
- DMZ Host
- RIP Setup
- Firewall
- Basic
- Filtering
- Local Log
- Remote Log
- VPN
- Basic
- IPsec
- Event Log
- Wireless
- Radio
- Radio
- Guest Network
- Advanced
- Access Control
- WMM
- Bridging
- MTA
- Status
- DHCP
- QoS
- Provisioning
- Event Log
- Battery
- Controller
- UPS
- Interface Delay
- USB
- USB Basic
- Approved Devices
- Storage Basic
- Storage Advanced
- MediaServer
- Q&A
SR808ac Cable Modem User Manual
42
Lease Pool Start:
This specifies the starting IP address for the guest network lease pool.
Lease Pool End:
This specifies the ending IP address for the guest network lease pool.
Lease Time:
This specifies the lease time for the guest network lease pool, once the CMRG
completes WAN provisioning.
5.6.4 Advanced
Choose Wireless > Advanced to display the following page.
This page allows you to configure advanced wireless settings.
54g™ Mode:
Sets the network mode. Choices are 54g Auto, 54g Performance, 54g LRS, and
802.11b Only. 54g Auto accepts 54g, 802.11g, and 802.11b clients, but optimizes
performance based on the type of clients connected. 54g Performance accepts only
54g™ clients and provides the highest throughout; nearby 802.11b networks may
have degraded performance. 54g LRS interoperates with the widest variety of
54g™, 802.11g, and 802.11b clients. 80211b.accepts only 802.11b clients.
54g™ Protection: