Manualshelf

User's Manual

ManualsBrandsSmartRG ManualsElectronicsWireless Repeater
11121314151617181920
User Manual
Page 19
of 35
Wireless Security Settings
The Wireless Security Settings page allows you to change the Security Mode,
enable or disable the WPS feature of your WL580E, and add a WPS enabled
device by entering the needed PIN.
• Security Mode. Select the type of encryption you want for your wireless
network.
• WPS. Allows you to enable or disable the WPS feature of your WL580E.
• Enrollee PIN. Enter this PIN on the Wireless Device that will be connecting
to WL580E repeater to automatically configure the wireless device.
• Registrar PIN. Here you can enter the WPS-PIN of the Wireless Devices and
click apply for the WL580E to allow access and configure your wireless
device automatically
Note: WPS will work only for WPA-PSK, WPA2-PSK and WPA/WPA2
encryption. Wireless Devices should also support the WPS feature to use
this option.