Instruction Manual

12. Temperature
12.1 Display and Trend of Temperature/Humidity
●
The current indoor temperature/humidity and the temperature/
humidity trend (indoor) are shown on the LCD display.
●
After connected with the outdoor sensor successfully, the
outdoor temperature/humidity and the temperature/humidity trend
(outdoor) can be shown on the LCD display.
You may see the following displays:
: The temperature/humidity is rising.
: The temperature/humidity is falling.
No display: The temperature/humidity is remaining constant.
12.2 °C or °F Temperature Display
●
The temperature displayed on the weather station either in °C or
°F. Briey pressing the "
" button allows you to switch between
the individual modes.
17
12.3 Max/Min Temperature & Humidity, Dew Point Temperature
and Heat Index
●
To toggle indoor/outdoor sensor maximum, minimum temperature
data, outdoor sensor dew point temperature date, heat index, press
the "
" button:
●
Once to display the maximum temperature values of indoor and
outdoor sensor.
Please take note of the following:
●
If the temperature reading is below the measurement range, LL.L
will be displayed.
●
If the temperature reading is above the measurement range,
HH.H will be displayed.
18
12.4 Outdoor Temperature Frost Alarm
●
When the outdoor temperature is between –1°C ~ 2.9°C (30.2°F
~ 37.3°F), the frost alarm function will be activated and a ashing "
" symbol will be displayed on the weather station.
12.5 Outdoor Sensor Mold Risk
●
Moldy risk total 3 levels: LO ME and HI, when the risk level is
HI, please check the room or outdoor sensor and pay attention to
dehumidication.
●
Twice to display the minimum temperature values of indoor and
outdoor sensor.
●
Three times to display the dew point temperature values of
outdoor sensor.
●
Four times to display the heat index values of outdoor sensor.
●
Five times to return to the current temperature levels.
●
To reset the maximum and minimum temperature, press and
hold down the "
" button more than 2 seconds. This will reset
all minimum and maximum data recorded to the current displayed
values.