User's Guide

a short time until your alarm goes off. When you hear this, you should disarm

your system as soon as possible. You can adjust the countdown timing from 0 to

299 seconds.

Alarm duration

Adjust alarm sound duration from 1 to 59 minutes.

Sensor low battery alarm

Enable to receive notification when the wireless accessory is low battery.

Countdown with tick tone

Turn countdown tick tone on or off when the hub is during Exit Delay or Entry

Delay.

Hub language

Choose local voice prompt and next message language from hub. (follow the

phone or pad system)

Reset

This process resets your hub to factory settings and disconnects all wireless

accessories.

Tap Settings > Factory reset in APP, or click configuration buttons more than 15

times until the bub sounds a tone , then the hub restarts. The factory reset is now

completed.

Change Zone Mode via APP

Each of sensors is specified a Zone mode, which defines the way in which the

system responds to faults in that zone.

In APP, tap Accessories and pick the detector you want to set, then change

Zone Mode from list described as followings.