User's Guide

Indicators

Placement/Installation

It is advised to install the hub over the ground more than 50 cm, do not install the

hub at the corner, because this will affect WiFi and RF signal reception.

It is not advised to mount the motion detector or door/window sensor onto metal

surfaces as the material can block RF signals between the transmitter and the

hub.

Please clean the flat area where you intend to install the sensors. Use a

double-sided adhesive to install the motion detector or door/window sensor.

Where to place hub

Find a spot with a good Wi-Fi signal that should be close to where you come and

go so your hub is easy to access on your way in and out.

Choose an outlet that’s not controlled by a switch, so you don’t accidentally turn

What you see

What it means

Blinking blue

Wi-Fi connection configuration in

Smart Mode @ quickly, in AP Mode

@ slowly

Blinking purple

Pairing/sniffer mode

Blinking red

Alarming

Blinking cyan

Somebody visit (Doorbell)

Solid green

Armed

Solid cyan

Home armed

Nothing

Disarmed