User's Manual

iSmartEV P01 User Manual
www.newsmartsafe.com
60
when entering a password, and whether notifications are displayed when the
screen is locked.
16.1.9 Location information
Used to manage applications' access to and use of device location information.
16.1.10 Security
Used for security management such as device lock screen encryption,
blocking/allowing the installation of applications from unknown sources.
16.1.11 System
Used to set device system information, including setting of device language and
input method, gesture, date and time parameters, backup, reset and multi-user
access etc.
16.1.12 USB management
Used to set the USB switch of the device.
1. After you select this option, set the USB switch status to ON. In this case,
the USB Type-C port is only used for charging.
2. Deselect this option and set the USB switch status to OFF. In this case,
the USB Type-A port on the device stops being used. The USB Type-C port
can be used to charge the device and connect the computer to transfer files.
3. Connect the computer through the USB Type-C interface of the device,
slide down the screen, [Charging the device through USB] will be displayed,
click this option, the USB debugging window will pop up. Click the USB
mode you want to use.
Note: Keep the USB switch ON when the device uses Wi-Fi for wireless
diagnosis.
16.2 Diagnostic feedback
If an unsolvable problem or diagnostic software problem is encountered during
diagnosis, the user can report the problem (the last 20 test records) back to us.